Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

Impingement of the hot supersonic jet on the barrier near the nozzle exit

Published: 14.11.2018

Authors: Yurchenko I.I., Klimenko A.G., Kudinov A.S., Isakov D.V.

Published in issue: #11(83)/2018

DOI: 10.18698/2308-6033-2018-11-1820

Category: Aviation and Rocket-Space Engineering | Chapter: Aerodynamics and Heat Transfer Processes in Aircrafts

The purpose of the research was to do the experimental study of the overexpanded hot supersonic jet of the small thrust model engine on gaseous oxygen / kerosene fuel components flowing into a flooded space at atmospheric pressure. The jet parameters were varied by changing the mass ratio oxygen/kerosene Km. The nozzle exit specific heat ratio was in the range from 1.2 to 1.3, and the jet stagnation temperature was in the range from 1528 K to 2764 K. The flat plate with 450 inclination was placed ahead the first Mach disk and involved the jet periphery region. The heat flow and pressure sensors were installed on the plate. The visualization of the jet and the zone of interaction with the plate were hampered by the radiating carbon particles, which were formed during combustion. The track directions in the molten material on the plate surface formed at the hot jet impinging were used to build the flow pattern. The destruction zones and material tracks coincidence for all flat plates indicates the steadiness of the hanging shock waves location with the jet parameters varying in the range of Km = 0.99…1.58. The study suggests a method for calculating heat fluxes in the central part of the jet on real components, using thermodynamic parameters calculated for an equilibrium reacting mixture, the method being satisfactorily consistent with the measurements carried out. High heat fluxes were obtained in the jet periphery region not only due to the jet mixing boundary layer impingement but because of the particular ejection of the hot gas from center region. Measurements in jet peripheries region are the subjects for the following investigations. The studies will be continued with larger nozzle


References
[1] Lamont P.J., Hunt B.L. The impingement underexpanded, axisymmetric jets on perpendicular and inclined flat plates. J. Fluid Mechanics, 1980, vol. 100, part 3, pp. 471–511.
[2] Avduevsky V.S., Ashratov E.A., Ivanov A.V., Pirumov U.G. Gasodinamika sverhzvukovykh neisobaricheskikh struy [Gas dynamics of supersonic non-isobaric jets]. Moscow, Mashinostroenie Publ., 1989, 320 p.
[3] Gubanova O.G., Lunev V.V., Plastinina L.N. Mekhanika zhidkosti i gasa — Fluid Dynamics, 1971, no. 2, pp. 135–138.
[4] Alyamovsky A.A., Sobachkin A.A., Odintsov E.V., Kharitonovich A.I., Ponomorev N.B. SolidWorks. Komputernoe modelirovanie v ingenernoy praktike [SolidWorks. Computer simulation in engineering practice]. St. Petersburg, BKhV-Peterburg Publ., 2005, 800 p.
[5] Kudimov N.F., Safronov A.V., Tretyakova O.N. Prikladnye zadachi gasodinamiki i teploobmena v energeticheskikh ustanovkakh raketnoy tekhniki [Applied problems of gas dynamics and heat transfer in power plants of rocket technology]. Moscow, MAI Publ., 2014, 167 p.
[6] Melton H.R., Shaw L.M., Sieker W.D.,White D.I. Simulation of non-continuum free jet plume impingement. AIAA Pap., 1968, no. 237.
[7] Antokhin V.M., Gerasimov Yu.I., Zhokhov V.A., Khomutsky A.A. Mekhanika zhidkosti i gasa — Fluid Dynamics, 1981, no. 4, pp. 119–126.
[8] Yurchenko I.I. Estestvenye i tekhnicheskie nauki — Natural and technical sciences, 2012, no. 2 (58), pp. 259–264.
[9] Alvi F.S., Iyer K.G. Mean and Unsteady Flowfield Properties of Supersonic Impinging Jets with Lift Plates. AIAA 99-1829, 1999.
[10] Malsur Dharavath and Debasis Chakraborty Numerical Simulation of Supersonic Jet Impingement on Inclined Plate. Defence Science Journal, 2013, vol. 63, no. 4, pp. 355–362.
[11] Nagata Y., Nonomura T., Fujii K., Yamamoto M. Analysis of Acoustic-Fields generated by Supersonic Jet Impinging on an Inclined Flat Plate and a Curved Plate. APCOM & ISCM, 11–14th December, 2013, Singapore.
[12] Ghanegaonkar P.M., Ramanujachari V., Vijaykant S. Experimental investigation on the supersonic jet impingement. Indian Journal of Engineering & Material Sciences, 2004, vol. 11, pp. 100–106.
[13] Antokhin V.M., Balashov Y.P., Gerasimov Yu.I., Dolgolenko A.I., Zhokhov V.A., Zvorykin L.L., Kuznetsova N.F., Kukanov F.A., Pleshakova L.A., Plotnikov B.P., Reshetin A.G., Stasenko A.L., Khomutsky A.A. Mekhanika zhidkosti i gasa — Fluid Dynamics, 1977, no. 3, pp. 124–133.
[14] Leytes E.A. Uchenye zapiski ZAGI — TsAGI Science Journal, 1975, vol. 6, no. 1, pp. 113–116.