Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

Improvement in the technology of manufacturing disk workpieces for metal lining of compact aircrafts

Published: 28.06.2018

Authors: Kruglov P.V., Bolotina I.A.

Published in issue: #8(80)/2018

DOI: 10.18698/2308-6033-2018-8-1787

Category: Aviation and Rocket-Space Engineering | Chapter: Design, construction and production of aircraft

The article presents the results of experimental studies of the manufacturing technology for disk workpieces with a conical surface for metal lining of compact aircrafts. To obtain the workpiece, it is necessary to create a periodic profile of the cross section of the workpiece in the circumferential direction when turning its end. Several variants of the work sequence are considered. The errors of the disk workpiece occurring in the production process are reduced comparing with the errors in the previous experiments with a complex treatment route and periodic cooling the workpiece. It was found that deformations of these thin-walled disk workpieces due to machining heating significantly affect the accuracy. Cooling is proposed to introduce between the end-turning passes. The treatment scheme is determined and the design of the workpiece with a wide technological shoulder is justified, ensuring the necessary accuracy of its manufacture


References
[1] Selivanov V.V., ed. Boepripasy. V 2 tomakh. Tom 1 [Ammunition. In 2 volumes. Vol. 1]. Moscow, BMSTU Publ., 2016, 506 p.
[2] Kolpakov V.I. Nauka i obrazovanie: electronnyy nauchno-tekhnicheskiy zhurnal — Science and Education: Electronic Scientific and technical Journal, 2012, no. 2. Available at: http://technomag.edu.ru/doc/334177.html (accessed December 10, 2016).
[3] Kruglov P.V., Kolpakov V.I. Inzhenernyy zhurnal: nauka i innovatsii — Engineering Journal: Science and Innovation, 2017, iss. 12. Available at: http://dx.doi.org/10.18698/2308-6033-2017-12-1714.
[4] Mikhalev A.N. Formiruemye vzryvom snaryady: aerodinamicheskie svoystva i metodiki formirovaniya (obzor po dannym zarubezhnykh rabot) [Projectiles formed by the blast: aerodynamic properties and methods of formation (overview of foreign works). Ioffe Institute Publ. Preprint. St. Petersburg, 2004, no. 1775, 38 p.
[5] Bugiel H.G. Insert for a projectile-forming charge. US patent 4590861, 27.05.1985, p. 6.
[6] Aubry J., Durand R.J., Kerdraon A.L., Solve G. Core-forming explosive charge. US patent 4922825, 08.05.1990, p. 7.
[7] Weimann K. Arrangement for production of explosively formed projectiles. US patent 4982667, 08.01.1991, p. 7.
[8] Liu J., Gu W., Lu M., Xu H., Wu S. Defense Technology, 2014, vol. 10, no. 2, pp. 119–123. DOI:10.1016/j.dt.2014.05.002 (accessed February 16, 2018).
[9] Asmolovsky N.A., Baskakov V.D., Tarasov V.A. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie — Proceedings of Higher Educational Institutions. Маchine Building, 2013, no. 8, pp. 8–14.
[10] Kruglov P.V., Bolotina I.A. Inzhenernyy zhurnal: nauka i innovatsii — Engineering Journal: Science and Innovation, 2017, iss. 9. Available at: http://dx.doi.org/10.18698/2308-6033-2017-9-1674
[11] Gavrilov A.N. Tochnost proizvodstva v mashinostroenii i priborostroenii [Precision of production in machine building and instrument making]. Moscow, Mashinostroenie Publ., 1973, 567 p.
[12] Kruglov P.V., Tarasov V.A., Baskakov V.D. Nauchnye osnovy roektirovaniya tekhnologii izgotovleniya pretsizionnykh kumulyativnykh zaryadov. [Scientific foundations of the manufacturing technology design for the precision shaped charges.]. Trudy mezhdunarodnoy konferentsii III Kharitonovskie tematicheskie nauchnye chteniya “Ekstremalnye sostoyaniya veshchestva. Detonatsiya. Udarnye volny” [Proceedings of the international conference III Kharitonov Thematic Scientific Readings “Extreme states of matter. Detonation. Shock Waves”]. Sarov, FGUP “RFYaTs-VNIIEF” Publ., 2002, pp. 254–257.
[13] Kruglov P.V., Tarasov V.A., Baskakov V.D. Analiz nasledstvennykh preobrazovaniy tekhnologicheskikh pogreshnostey pri izgotovlenii kumulyativnykh zaryadov. [Analysis of hereditary transformations of technological errors in the manufacture of shaped charges.]. Trudy mezhdunarodnoy konferentsii V Kharitonovskie tematicheskie nauchnye chteniya “Veshchestva, materialy i konstruktsii pri intensivnykh dinamicheskikh vozdeystviyakh” [Proceedings of the international conference V Kharitonov Thematic Scientific Readings “Substances, materials and structures under intensive dynamic effects”]. Sarov, FGUP “RFYaTs-VNIIEF” Publ., 2003, pp. 477–480.
[14] Kruglov P.V., Tarasov V.A., Baskakov V.D. Matematicheskoe modelirovanie yavleniy tekhnologicheskoy nasledstvennosti pri izgotovlenii kumulyativnykh zaryadov. [Mathematical modeling technological heredity phenomena in the manufacture of shaped charges.]. Trudy mezhdunarodnoy konferentsii VII Kharitonovskie tematicheskie nauchnye chteniya “Ekstremalnye sostoyaniya veshchestva. Detonatsiya. Udarnye volny” [Proceedings of the international conference VII Kharitonov Thematic Scientific Readings “Extreme states of matter. Detonation. Shock Waves”]. Sarov, FGUP “RFYaTs-VNIIEF” Publ., 2005, pp. 645–648.