Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

Mathematical model of a maneuvering nanosatellite with a heliothermal propulsion system and a flywheel orientation and stabilization system

Published: 18.05.2021

Authors: Zhumaev Z.S.

Published in issue: #5(113)/2021

DOI: 10.18698/2308-6033-2021-5-2078

Category: Aviation and Rocket-Space Engineering | Chapter: Design, construction and production of aircraft

The paper considers a possibility of using a heliothermal propulsion system for constructing constellations of nanosatellites in the CubeSat format. Such a propulsion system implies direct heating of the working fluid by focused solar radiation. In comparison with electric jet engines, the proposed propulsion has orders of magnitude higher thrust, which makes it possible to build a constellation of nanosatellites in low Earth orbit in less than 6 days. In comparison with electrothermal motors, the presented solution achieves higher efficiency of converting the energy of solar radiation into the thermal energy of the working fluid. The spacecraft motion was simulated taking into account the mutual influence of the propulsion system, the orientation and stabilization system, the power supply system, as well as the passage of the shadow sections of the orbit in which there is a loss of electrical and thermal energy.


References
[1] Buchen E. 2014 nano/microsatellite market assessment. SpaceWorks Enterpri-ses, 2014, vol. 12. Available at: https://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=3018&context=smallsat (accessed March 27, 2021).
[2] Swartwout M. The first one hundred cubesats: A statistical look. J. Small Satell., 2013, vol. 2, no. 2. pp. 213–233.
[3] Foster C., Mason J., Vittaldev V., Leung L., Beukelaers V., Stepan L., Zimmerman R. Differential drag control scheme for large constellation of planet satellites and on-orbit results. arXiv preprint, 2018, arXiv:1806.01218. Available at: https://arxiv.org/abs/1806.01218 (accessed March 27, 2021).
[4] Lemmer K. Propulsion for CubeSats. Acta Astronautica, 2017, vol. 134, pp. 231–243.
[5] Rysanek F., Hartmann J., Schein J., Binder R. Microvacuum arc thruster design for a CubeSat class satellite. 16th Annual/USU Conference on Small Satellites, 2002. SSC02-I-2. Available at: https://www.researchgate.net/publication/228693381_Microvacuum_arc_thruster_design_for_a_CubeSat_class_satellite (accessed March 27, 2021).
[6] Schein J., Gerhan A., Rysanek F., Krishnan M. Vacuum arc thruster for cubesat propulsion. IEPC-0276, 28th IEPC, 2003, vol. 100. Available at: http://electricrocket.org/IEPC/0276-0303iepc-full.pdf (accessed March 27, 2021).
[7] Guarducci F., Coletti M., Gabriel S. Design and testing of a micro pulsed plasma thruster for cubesat application. 32nd international electric propulsion confe-rence. 2011. pp. 2011–2239. Available at: http://electricrocket.org/IEPC/IEPC-2011-239.pdf (accessed March 27, 2021).
[8] Coletti M., Guarducci F., Gabriel S. A micro ppt for cubesat application: Design and preliminary experimental results. Acta Astronautica, 2011, vol. 69, no. 3–4, pp. 200–208.
[9] Krejci D., Mier-Hicks F., Fucetola C., Lozano P., Schouten A. H., Martel F. Design and characterization of a scalable ion electrospray propulsion system. 2015. Researchgate Available at: https://www.researchgate.net/profile/David-Krejci-2/publication/280098850_Design_and_Characterization_of_a_Scalable_ion_Electrospray_Propulsion_System/links/55a9135808aea3d086802b63/Design-and-Characterization-of-a-Scalable-ion-Electrospray-Propulsion-System.pdf (accessed March 27, 2021).
[10] Mathur R. Low thrust trajectory design and optimization: Case study of a lunar cubesat mission. Proceedings of the 6th international conference on astrodynamics tools and techniques, 2016, pp. 1–11. Available at: https://indico.esa.int/event/111/contributions/372/attachments/379/422/ICATT6_PAPER-Lunar_CubeSat_Trajectory_Design-Mathur.pdf (accessed March 27, 2021).
[11] Imken T.K., Stevenson T.H., Lightsey E.G. Design and testing of a cold gas thruster for an interplanetary cubesat mission. J. Small Satell., 2015, vol. 4, no. 2, pp. 371–386.
[12] Manzoni G., Brama Y.L. Cubesat micropropulsion characterization in low earth orbit. Proceedings of the 15th Small Satellite Conference, 2015, vol. 4, no. 5. Available at: https://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=3190&context=smallsat (accessed March 27, 2021).
[13] CubeSat design specification Rev. 13. California Polytechnic State University. Available at: https://static1.squarespace.com/static/5418c831e4b0fa4ecac1bacd/t/56e9b62337013b6c063a655a/1458157095454/cds_rev13_final2.pdf (accessed March 14, 2021).
[14] Cofer A. G., O’Neill W. J., Heister S. D., Alexeenko A., Cardiff E. H. Film-evaporation mems tunable array for low-mass smallsat propulsion: Design improvements and thrust characterization. 51st AIAA/SAE/ASEE Joint Propulsion Conference, 2015, paper no. 3993. https://arc.aiaa.org/doi/abs/10.2514/6.2015-3993
[15] Cervone A., Zandbergen B., Guerrieri D.C., e Silva M.D.A.C., Krusharev I., van Zeijl H. Green micro-resistojet research at Delft University of Technology: New options for CubeSat propulsion. CEAS Space Journal, 2017, vol. 9, no. 1, pp. 111–125.
[16] Polman A., Knight M., Garnett E.C., Ehrler B., Sinke W.C. Photovoltaic mate-rials: Present efficiencies and future challenges Science. American Association for the Advancement of Science, 2016 vol. 352, no. 6283, paper no. aad4424.
[17] Pottinger S., Krejci D., Scharlemann C. Development of a ppt for CubeSat applications. 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2008, paper no. 4532. https://arc.aiaa.org/doi/abs/10.2514/6.2008-4532
[18] BET-100 Busek electrospray thruster, datasheet. Busek Co. Inc. Available at: http://www.busek.com/index_htm_files/70008516F.PDF (accessed March 14, 2021).
[19] Grilikhes V.A. Kosmicheskiye solnechnyye energostantsii [Space solar power plants]. Leningrad, Nauka, 1986, pp. 51–61.
[20] Finogenov S.L., Kolomentsev A.I., Kudrin O.I. Use of various oxidants for the afterburning of hydrogen heated in a rocket engine by solar energy. Siberian Journal of Science and Technology, 2015, vol. 16, no. 3, pp. 680–689.
[21] Koroteev A.S., et al. Solar power propulsion systems are an effective way of developing interorbital transportation means. Izvestiya Rossiyskoy akademii nauk. Energetika — Bulletin of the Russian Academy of Sciences. Energy, 2004, no. 5, pp. 46–58.
[22] Zhumaev Z.S., Shcheglov G.A. Operations dynamics analysis of solar thermal propulsion for CubeSats. Advances in Space Research, 2019, vol. 64, no. 4, pp. 815–823.
[23] Markley F.L., Crassidis J.L. Fundamentals of spacecraft attitude determination and control. Springer, 2014, vol. 33, pp. 287–423.
[24] Weisstein E.W. Lune. Mathworld–a wolfram web resource. Available at: https://mathworld.wolfram.com/Lune.html (accessed March 14, 2021).
[25] Belenky A., Vasiliev V. Izvestiya RAS. MTT, 1996, no. 2, pp. 75–81.
[26] Belenky A.D., et al. Algorithm for controlling the system of four flywheel engines of METEOR-m series spacecraft. Voprosy elektromekhaniki No. 2. Proceedings of VNIIEM, 2013, vol. 134, no. 3, pp. 9–14.
[27] Thermal control coatings developed and made by the PJSC “Composite”. JSC “Kompozit”. Available at: http://kompozit-mv.ru/index.php/en/nonmetallic-materials/127-thermal-control-coatings (accessed March 14, 2021).