Analysis of temperature measuring error in high-temperature ceramic samples with various methods of thermocouple fixing
The evaluation of methodological errors in measuring the temperature of nitride ceramics under unilateral heating by high-intensity heat flow was carried out. Simulation of thermal processes in the temperature sensor — sample system was performed using the Siemens PLMNX program. Various methods of fixing platinum-rhodium thermocouples with a diameter of 0.1 mm on the surface and inside the samples have been investigated. The regularities of the influence of the size of the hot junction, the presence of thermal cement, the shape of the grooves for fixing thermocouples on the methodological error of temperature measurement were investigated. Significant errors were revealed when installing thermocouples on the surface of the sample without violating its integrity. Recommendations for the installation of thermocouples were given. The results of the paper can be useful in the preparation of experimental samples for thermal tests on radiation heating stands.
 Suzdaltsev E.I. Ceramic radio-transparent materials: yesterday, today, tomorrow. Novye Ogneupory — New Refractories, 2014, no. 10, pp. 130–133.
 Zhitnyuk S.V. Oxygen-free ceramic materials for aerospace engineering (review). Trudy VIAM — Proceedings of VIAM, 2018, no. 8, pp. 81–87.
 Polezhaev Yu.V., Reznik S.V., Vasilevsky E.B. Materials and coatings in extreme conditions. A look into the future. In 3 vols. Vol. 1: Forecasting and analysis of extreme impacts. S.V. Reznik, ed. Moscow, BMSTU Press, 2002, 224 p.
 Chevykalova L.A., Kelina I.Yu., Mikhalchik I.L., Arakcheev A.V., Plyasunova L.A., Kasimovsky A.A., Matyushin K.S. Preparation of ultra-high-temperature ceramic material based on zirconium diboride by the SPS method. Novye Ogneupory — New Refractories, 2013, no. 11, pp. 31–38.
 Sorokin O.Y., Solntsev S.S., Evdokimov S.A. Ceramic composite materials with high oxidation resistance for advanced aircraft (review). Electronic journal “Proceedings of VIAM”, 2014, no. 6. DOI: 10.18577/2307-6046-2014-0-6-8-8
 Ivakhnenko Y.A., Varrik N.M., Maksimov V.G. High-temperature radio-transparent ceramic composite materials for antenna fairings and other aircraft products (review). Electronic journal “Proceedings of VIAM”, 2016, no. 5. DOI: 10.18577/2307-6046-2016-0-5-5-5
 Reznik S.V., Rusin M.Yu., Shulyakovsky A.V. Diagnostic tools for rocket fairings made of non-metallic materials during bench thermal tests. Moscow, BMSTU Press, 2016, 37 p.
 Yaryshev N.A. Theoretical foundations of measurement of non-stationary temperature. Leningrad, Energoatomizdat, 1990, 256 p.
 Alifanov O.M., Jarny Y., Prosuntsov P.V., Ivanov G.A. Complex identification of thermophysical properties of anisotropic composite material. Proceedings of the 5th International Conference on Inverse Problems in Engineering: Theory and Practice, Cambridge, UK, 11–15th July 2005. Available at: https://www.researchgate.net/publication/228427535_Complex_identification_of_thermophysical_properties_of_anisotropic_composite_material (accessed November 5, 2021).
 Anuchin S.A., Lanin A.V., Prosuntsov P.V., Kordo M.N., Zabezhailov M.O., Rusin M.Yu. Influence of the method of sealing surface thermocouples on the error of temperature determination when testing ceramic materials on radiation heating installations. Engineering Physics Journal, 2018, vol. 91, no. 3, pp. 628–636.
 Reznik S.V., Zabezhailov M.O., Anuchin S.A., Sotnikov M.O., Afonin K.V. Highly efficient absorbing coatings for thermophysical studies at radiation heating installations. Bulletin of the Bauman Moscow State Technical University. Series Mechanical Engineering, 2012, no. 3, pp. 120–131.
 Baldzhiev R., Prosuntsov P. Modeling Combined Heat Transfer in the Operating Area of the High Power Heating Test Facility. MATEC Web of Conferences. EDP Sciences, 2017, vol. 110, p. 01009. DOI: 10.1051/matecconf/ 201711001009