Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

The results of the experimental research of the processes of the hydrocarbon propellant temperature preparation using a heat exchanger placed in antifreeze

Published: 14.01.2019

Authors: Aleksandrov A.A., Barmin I.V., Pavlov S.K., Chugunkov V.V.

Published in issue: #1(85)/2019

DOI: 10.18698/2308-6033-2019-1-1842

Category: Aviation and Rocket-Space Engineering | Chapter: Ground Complexes, Launch Equipment, Aircraft Exploitation

The article describes the experimental stand and the results of an experimental research of the hydrocarbon propellant temperature preparation in a heat exchanger placed in an antifreeze medium. The mode of propellant cooling is provided by cooling the antifreeze by liquid nitrogen sparging, and the mode of propellant heating with a tubular electric heater placed in a tank with antifreeze. The operation of hydrocarbon propellant temperature preparation is used in space rocket complexes to provide the necessary properties of the propellant and improve the efficiency of propulsion systems for space rockets. The experiments implemented an efficient technology for cooling hydrocarbon propellant by improving heat transfer on the outer surface of the heat exchanger due to the interaction of liquid nitrogen with antifreeze. The experimental research resulted in obtaining quantitative data on the processes of propellant cooling and heating in a heat exchanger located in an antifreeze medium in the temperature range of 243...293 K. Experimental data were obtained about the characteristics of heat transfer required for calculating the heat transfer between the propellant and the antifreeze and determining the parameters of the processes of the propellant temperature preparation


References
[1] Aleksandrov A.A., Barmin I.V., Kunis I.D., Chugunkov V.V. Vestnik MGTU im. N.E. Baumana. Ser. Mashinostroyeniye — Herald of the Bauman Moscow State Technical University. Series: Mechanical Engineering, 2016, no. 2, pp. 7–27.
[2] Aleksandrov A.A., Denisov O.E., Zolin A.V., Chugunkov V.V. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie — Proceedings of Higher Educational Institutions. Маchine Building, 2013, no. 4, pp. 24–29.
[3] Denisov O.E., Zolin A.V., Denisova K.I. Nauka i obrazovanie: electronnyy nauchno-tekhnicheskiy zhurnal — Science and Education: Electronic Scientific and technical Journal, 2014, no. 11. DOI: 10.7463/1114.0732218
[4] Aleksandrov A.A., Goncharov R.A., Igritsky V.A., Chugunkov V.V. Vestnik MGTU im. N.E. Baumana. Ser. Mashinostroyeniye — Herald of the Bauman Moscow State Technical University. Series: Mechanical Engineering, 2011, no. 1, pp. 40–46.
[5] Kobyzev S.V. Nauka i obrazovanie: electronnyy nauchno-tekhnicheskiy zhurnal — Science and Education: Electronic Scientific and technical Journal, 2011, no. 11. Available at: http://engineering-science.ru/doc/245147.html (accessed December 20, 2016).
[6] Kobyzev S.V. Modelirovanie massoobmennykh protsessovpri obezvozhivanii uglevodorodnogo raketnogo goruchego barbotirovaniem azotom [Simulation of mass transfer processes during the dehydration of hydrocarbon rocket propellant by nitrogen sparging]. Aktualnye problemy Rossiyskoy kosmonavtiki. Materialy XXХVI akademicheskikh chteniy po kosmonavtike [Proceedings of the XXXVI academic readings on cosmonautics. Actual problems of the Russian cosmonautics]. Moscow, Komissiya RAS Publ., 2012, pp. 356–357.
[7] Kobyzev S.V. Metodika poverochnogo rascheta protsessa osushki uglevodorodnogo goruchego metodom barbotazha gazoobraznym azotom [Methods of checking calculation of the hydrocarbon propellant drying process by gaseous nitrogen sparging]. Aktualnye problemy Rossiyskoy kosmonavtiki. Materialy XXХVI akademicheskikh chteniy po kosmonavtike [Proceedings of the XXXVI academic readings on cosmonautics. Actual problems of the Russian cosmonautics]. Moscow, Komissiya RAS Publ., 2013, pp. 385–386.
[8] Domashenko O.E. Sistemy termostatirovaniya [Temperature control systems]. In: Istoriya razvitiya otechestvennoy nazemnoy raketno-kosmicheskoy infrastruktury [The history of the domestic ground-based space rocket infrastructure development]. Moscow, Sovetskaya entsiklopediya Publ., 2017, pp. 299–301.
[9] Komlev D.E., Solovyev V.I. Okhlazhdenie naftila metodom kriogennogo barbotazha [Naphthyl cooling by cryogenic sparging]. In: Novosti tekhniki. Sbornik [Technology News. Collection]. Moscow, Konstruktorskoe buro transportnogo mashinostroeniya Publ., 2004, pp. 137–141.
[10] Domashenko A.M., Blinova I.D. Khimicheskoe i neftegazovoe mashinostroenie — Chemical and Petroleum Engineering, 2007, no. 12, pp. 17–19.
[11] Nakoryakov V.E., Tsoy A.N., Mezentsev I.V., Meleshkin A.V. Sovremennaya Nauka: issledovaniya,idei, rezultaty, tekhnologii — Modern Science: Researches, Ideas, Results, Technologies, 2013, no. 1 (12), pp. 260–264.
[12] Nakoryakov V.E., Tsoi A.N., Mezentsev I.V., Meleshkin A.V. Boiling-up of Liquid Nitrogen Jet in Water. Thermophysics and Aeromechanics, 2014, vol. 21, issue 3, pр. 279–284.
[13] Nakoryakov V.E., Tsoy A.N., Mezentsev I.V., Meleshkin A.V. Teplofizika i aeromekhanika — Thermophysics and Aeromechanics, 2014, no. 3, pp. 293–298.
[14] Pavlov S.K., Chugunkov V.V. Inzhenernyy zhurnal: Nauka i innovatsii — Engineering Journal: Science and Innovation, 2016, no. 1 (49), p. 2. DOI: 10.18698/2308-6033-2016-1-1461
[15] Aleksandrov A.A., Barmin I.V., Pavlov S.K., Chugunkov V.V. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie — Proceedings of Higher Educational Institutions. Маchine Building, 2017, no. 4, pp. 86–95.