Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

Methodological support and calculation of operational parameters of experimental testing of model rocket-ramjet engines

Published: 22.11.2016

Authors: Yagodnikov D.A., Sukhov A.V., Iryanov N.Ya.

Published in issue: #12(60)/2016

DOI: 10.18698/2308-6033-2016-12-1562

Category: Aviation and Rocket-Space Engineering | Chapter: Thermal, Electric Jet Engines, and Power Plants of Aircrafts

The objective of this project was to develop a calculating technique for ensuring necessary operational parameters of pneumohydraulic system of a bench complex for testing model rocket-ramjet engines. We solved this problem by using a fire air heater simulating the conditions on entering the afterburner. The conditions were similar to those in the flight. We developed sets of equations and performed thermodynamic calculations of the working body structure produced by a heating gas generator at kerosene combustion in the air and oxygen regeneration by additional oxygen consumption directly in front of the afterburner. We obtained the equilibrium temperature values and the values of relative mass concentration of combustion products. The values are necessary for determining the operational parameters of the bench equipment and analysis of the experimental data obtained at fire bench tests.


References
[1] Polezhayev Yu.V., Shishkov A.A. Gas-dynamic tests of thermal protection [Gas-dynamic tests of thermal protection]. Handbook. Moscow, Promedek Publ., 1992, 248 p.
[2] Trusov B.G. Inzhenernyi zhurnal: nauka i innovatsii - Engineering Journal: Science and Innovation, 2012, issue 1. DOI: 10.18698/2308-6033-2012-1-31
[3] Alexandrov V.Yu., Arefyev K.Yu., Prokhorov A.N., Fedotova K.V., Sharov M.S., Yanovsky Ya.S. Izvestiya vysshikh uchebnykh zavedenii. Mashinostroenie - Proceedings of Higher Educational Institutions. Machine building, 2016, no. 2 (671), pp. 65-75. DOI: 10.18698/0536-1044-2016-2-65-75
[4] Volkov V.T., Yagodnikov D.A. Issledovaniya i stendovaya otrabotka RDTT [Studies and bench testing of solid-propellant rocket engines]. Moscow, BMSTU Publ., 2007, 296 p.
[5] Yagodnikov D.A. Vosplamenenie i gorenie poroshkoobraznykh metallov [Ignition and combustion of powdery metals]. Moscow, BMSTU Publ., 2009, 436 p.