Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

The study of temperature change in the working gap of magnetic-liquid sealers using ANSYS program

Published: 27.10.2015

Authors: Vlasov A.M., Poletaev V.A.

Published in issue: #8(44)/2015

DOI: 10.18698/2308-6033-2015-8-1419

Category: Mechanics | Chapter: Dynamics, Strength of Machines, Instruments, and Equipment

During operation of magnetic fluid sealant as a result of heating magnetic properties of fluid may deteriorate and flow can occur under the pole teeth. To study the effect of temperature on change of the friction torque in the working gap of magnetic-liquid sealer an installation has been designed and constructed. Using the ANSYS, a thermal analysis was made, allowing to analyze the processes that occur in magnetic-liquid seal at its operation, as well as to optimize its design.


References
[1] Vlasov A.M., Poletaev V.A. Issledovaniye vliyaniya temperatury na izmeneniye momentov treniya v rabochem zazore magnitozhidkostnykh ustroystv [Investigation of the effect of temperature on change of the friction torques in the working gap of magnetic-liquid devices]. In: Sostoyaniye i perspektivy razvitiya elektro- i teplotekhnologii. Materialy Mezhdunarodnoi nauchno-tekhnicheskoy konferentsii (XVIII Bernardovskie chteniya) [State and prospects of development of electrical and heat technologies. Materials of the International scientific conference (XVIII Bernard Readings)]. Ivanovo, 2015, pp. 319-322.
[2] Vlasov A.M., Poletaev V.A. Raschet momentov treniya v magnitozhidkostnykh ustroystvakh pri gidrodinamicheskoy (zhidkostnoy) smazke [Calculation of the friction torques in the magnetic-liquid devices with hydrodynamic (liquid) lubricant]. In: Sostoyaniye i perspektivy razvitiya elektro- i teplotekhnologii. Materialy Mezhdunarodnoi nauchno-tekhnicheskoy konferentsii (XVIII Bernardovskie chteniya) [State and prospects of development of electrical and heat technologies. Materials of the International scientific conference (XVIII Bernard Readings)]. Ivanovo, 2015, pp. 288-290.
[3] Vlasov A.M., Golyas A.A., Poletaev V.A. Primeneniye programmy ANSYS dlya teplovogo analiza magnitozhidkostnogo germetizatora [Application of ANSYS software for the thermal analysis of magnetic-liquid sealer]. In: Sostoyaniye i perspektivy razvitiya elektro- i teplotekhnologii. Materialy Mezhdunarodnoi nauchno-tekhnicheskoy konferentsii (XVIII Bernardovskie chteniya) [State and prospects of development of electrical and heat technologies. Materials of the International scientific conference (XVIII Bernard Readings)]. Ivanovo, 2015, pp. 337-341.