Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

Sectioning method application to determine stress intensity factor along the front of a semi-elliptical transverse edge crack in a stretched flat bar

Published: 15.03.2019

Authors: Pokrovskiy A.M., Dubovitsky E.I.

Published in issue: #3(87)/2019

DOI: 10.18698/2308-6033-2019-3-1861

Category: Mechanics | Chapter: Dynamics, Strength of Machines, Instruments, and Equipment

The article presents the developed method of analytic determination of the stress intensity factor distribution along the front of a semi-elliptical edge transverse crack in a flat bar stretched by constant stresses. The calculation is based on the method of sections. According to the method, the equilibrium equation for the normal force is written, which comes to the equality of the normal forces at the free end of the bar and in the plane of the crack. We show that between the values of the stress intensity factor at the deepest point and at the point coming to the surface, one can introduce a rigid constraint depending on the ratio of the crack depth to its half-length and the ratio of the crack depth to the bar thickness. The introduction of this connection allowed to use only one equilibrium equation in the calculation. To test the obtained data for a bar of infinite width, we compared this data and the results of calculating the stress intensity factor from the approximation formulae available in the reference literature. The possibility of using the developed methodology for a flat bar of finite width is justified by comparing the results of calculation by the proposed method with numerical values obtained in the process of solving the problem by the finite element method in the ANSYS software environment


References
[1] Cherepanov G.P. Mekhanika razrusheniya [Mechanics of destruction]. Moscow—Izhevsk, Institut komp’yuternykh issledovaniy Publ., 2012, 872 p.
[2] Glushkov S.V., Skvortsov Yu.V., Perov S.N. Comparison of the results of solving the problem of fracture mechanics for pipe with non-through crack. PNRPU Mechanics Bulletin, 2014, no. 3, pp. 36–49. DOI: 10.15593/perm.mech/2014.3.03
[3] Panasyuk V.V., ed. Mekhanika razrusheniya i prochnost materialov [Fracture mechanics and the strength of materials. A handbook in 4 vols.]. Vol. 2: Savruk M.P. Koeffitsiyenty intensivnosti napryazheniy v telakh s treshchinami [Stress intensity factors in media with cracks]. Kiev, Nauk. dumka, 1988, 620 p.
[4] Murakami Yu., ed. Spravochnik po koeffitsiyentam intensivnosti napryazheniy. [Handbook of Stress Intensity Factors]. Vol. 2. Moscow, Mir Publ., 1990, 1016 p. [Russian translation].
[5] Matvienko Yu.G. Modeli i kriterii mekhaniki razrusheniya [Models and criteria for fracture mechanics]. Moscow, Fizmathlit Publ., 2006, 328 p.
[6] Sapunov V.T. Prochnost povrezhdennykh truboprovodov: tech i razrusheniye truboprovodov s treshchinami [Strength of damaged pipelines: leakage and destruction of pipelines with cracks]. 3rd ed. Moscow, Lenand Publ., 2019, 187 p.
[7] Bochektueva E.B., Rogov V.E. Omskiy nauchnyy vestnik — Omsk Scietntific Bulletin, 2017, no. 6 (156), pp. 12–14.
[8] Parton V.Z., Morozov Ye.M. Mekhanika uprugoplasticheskogo razrusheniya: Osnovy mekhaniki razrusheniya [Mechanics of elastoplastic destruction: Fundamentals of fracture mechanics]. 3rd ed. Moscow, LKI Publ., 2008, 352 p.
[9] Googe S.Yu., Tabolin I.S., Shiryaev Ye.I., Shron L.B. Vestnik of Kuzbass State Technical University — Bulletin of the Kuzbass State Technical University, 2012, no. 1, pp. 137–140.
[10] Pokrovsky A.M., Leshkovtsev V.G., Zemskov A.A. Vestnik mashinostroyeniya — Bulletin of Mechanical Engineering, 2001, no. 10, pp. 56–60.
[11] Pokrovsky A.M. Termoprochnost’ tsel’nokovanykh i bandazhirovannykh prokatnykh valkov [Thermal strength of one-forged and banded rolls]. Moscow, BMSTU Publ., 2017, 272 p.
[12] Demmel J.W. Applied numerical linear algebra. Society for Industrial and Applied Mathematics, Philadelphia, 1997 [In Russ.: Demmel J.W. Vychislitel’naya lineynaya algebra: teoriya i prilozheniya. Moscow, Mir Publ., 2001, 429 p.].