Numerical study of the effect of roller profile and ring skew on roller raceways contact pressure in cylindrical roller bearing
Authors: Klebanov J.M., Petrov V.R., Adeyanov I.E.
Published in issue: #10(94)/2019
DOI: 10.18698/2308-6033-2019-9-1927
Category: Mechanics | Chapter: Dynamics, Strength of Machines, Instruments, and Equipment
Occurring during operation inhomogeneity of the contact pressure distribution between the rollers and the bearing rings due to skew affects the durability and dynamics of the bearing parts. The article describes a modified method of normal contact pressure determination according to the theory, based on the Bousinessque equation. The efficiency of the method is estimated and results of numerical simulation of normal contact pressure distribution in the contact of the roller with the raceway of the inner ring of the cylindrical roller bearing for different roller profiles, loads, and skew angles are presented. It is shown that the logarithmic profile creates the lowest pressure concentration at the ends of the roller.
References
[1] Batenkov S.V. Trudy VNIIP (Journal of All-Union Research Institute of the Bearing Industry), 1979, no. 3, pp. 111–121.
[2] Batenkov S.V. Vliyanie perekosa na dolgovechnost rolikopodshipnikov (obzor) [The effect of skewing on the service life of roller bearings (review)]. Moscow, NIIAVTOPROM Publ., 1981, 46 p.
[3] Batenkov S.V. Trudy VNIIP (Journal of All-Union Research Institute of the Bearing Industry), 1982, no. 3, pp. 28–37.
[4] Lundberg G. Cylinder Compressed Between Two Plane Bodies. Göteborg, Sweden, SKF Publ., 1949, p. 130.
[5] Hertz H. Miscellaneous Papers . London, Macmillan and Co. Ltd., 1896, Ch. 5.
[6] Hertz H. Miscellaneous Papers. London, Macmillan and Co. Ltd., 1896, Ch. 6.
[7] Liu J.Y. Problemy treniya i smazki — Journal of Lubrication Technology, 1971, vol. 93, no. 1, pp. 60–68.
[8] Harris Т.A. Problemy treniya i smazki — Journal of Lubrication Technology, 1969, vol. 91, no. 2, pp. 294–300.
[9] Singh K.P., Paul B. Journal of Engineering for Industry, 1975, vol. 97, no. 3, pp. 990–994.
[10] Oh K.P., Trachman E.G. Journal of Lubrication Technology, Trans. ASME, 1976, October, Series F 98, pp. 68–75.
[11] Hartnett M.J. Journal of Lubrication Technology, Trans. ASME, 1979, January, vol. 101, pp. 105–109.
[12] Hartnett M.J. Solid contact and lubrication AMD ASME, 1980, vol. 39, pp. 51–66.
[13] Harris T.A., Kotzalas M.N. Advanced Concepts of Bearing Technology. New York, Taylor and Francis Group Publ., 2007, 352 p.
[14] Klebanov Ya.M., Murashkin V.V., Danilchenko A.I., Adeyanov I.E. Izvestiya vysshikh uchebnykh zavedeniy. Aviatsionnaya tekhnika — Russian Aeronautics, 2017, vol. 60, no. 4, pp. 162–165.
[15] Johns P., Gohar R. Tribology International, 1981, 14, pp. 131–136.