Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

Analysis of the trunk oil pipeline survivability in the zone of the butt welded joint

Published: 09.04.2021

Authors: Pokrovskiy A.M., Dubovitsky E.I.

Published in issue: #4(112)/2021

DOI: 10.18698/2308-6033-2021-4-2069

Category: Mechanics | Chapter: Mechanics of Deformable Solid Body

The article describes the development of a technique for analyzing the survivability of the trunk pipeline in the zone of the transverse weld during operation, taking into account the residual welding stresses. The calculation of residual welding stresses was performed by solving the problem of thermoelasto-viscoplasticity for a material with a non-stationary structure by the finite element method. Solving the nonlinear nonstationary heat conduction problem was carried out by the finite difference method using boundary conditions of the third kind. Modeling the kinetics of transformation of austenite into ferrite-pearlite and bainite under non-isothermal conditions during welding was carried out on the basis of the theory of isokinetic reactions. The calculation of survivability is based on the Irwin criterion and the Paris formula.


References
[1] Odintsev I.I., Apalkov A.A., Razumovsky I.A. Zavodskaya laboratoriya. Diagnostika materialov — Industrial Laboratory. Diagnostics of Materials, 2003, no. 2, pp. 45–49.
[2] Chernyatin A.S., Razumovsky I.A. Problemy mashinostroeniya i nadezhosti mashin — Journal of Machinery Manufacture and Reliability, 2015, no. 5, pp. 93–102.
[3] Moshchenko M.G., Rubtsov V.S., Korableva S.A. Voprosy Materialovedeniya (Journal of Materials Science), 2011, no. 4 (68), pp. 105–115.
[4] Minkevich V.A., Fayrushin A.M., Chernyatyeva R.R., Karetnikov D.V. Elektronnyy nauchnyy zhurnal Neftegazovoye delo — The electronic scientific journal “Oil and Gas Business”, 2013, no. 6, pp. 356–367.
[5] Kurkin A.S., Makarov E.L. Svarka i diagnostika — Welding and diagnostics, 2010, no. 1, pp. 16–24.
[6] Christian J.W. The Theory of Transformations in Metals and Alloys. P. I, II. Pergamon Press Publ., 2002, 1200 p.
[7] Parton V.Z., Morozov E.M. Mekhanika uprugoplasticheskogo razrusheniya: Osnovy mekhaniki razrusheniya [Elastoplastic Fracture Mechanics: Fundamentals of Fracture Mechanics]. Moscow, LKI Publ., 2008, 352 p.
[8] Forman R.G., Kearney V.E., Engle R.M. Journal Basic Engineering, Transactions of ASME, 1967, vol. 89, no. 549, pp. 459–464.
[9] Colliprist J.E. Jr. An Experimentalist’s View of the Surface Flaw Problem. In: The Surface Crack Physical Problems and Computational Solutions. Swedlow J.L., ed. ASME Publ., 1972, pp. 43–62.
[10] Veselukha V.M., Shishkin A.E., Bogdanovich A.V. Mekhanika mashin, mekhanizmov i materialov — Mechanics of machines, mechanisms and materials, 2014, no. 3, pp. 53–58.
[11] Sosnovsky L.A., Bogdanovich A.V. Problemy prochnosti — Strength of Mate-rials, 1995, no. 5–6, pp. 39–61.
[12] Panovko G.Ya., Naraykin O.S., Pokrovsky A.M., Volokhovskaya O.A. Problemy mashinostroeniya i nadezhosti mashin — Journal of Machinery Manufacture and Reliability, 2005, no. 3, pp. 39–45.
[13] Feodosyev V.I. Soprotivleniye materialov [Strength of materials]. Moscow, BMSTU Publ., 2018, 544 p.
[14] Cherepanov G.P. Mekhanika razrusheniya [Fracture mechanics]. Izhevsk, Institut kompyuternykh issledovaniy Publ., 2012, 872 p.
[15] Tsvetkov F.F., Grigoryev B.A. Teplomassobmen [Heat and mass transfer]. Moscow, MEI Publ., 2011, 562 p.
[16] Pokrovsky A.M., Avagimov S.S., Dubovitsky E.I. Nauka i obrazovanie: electronnyy nauchno-tekhnicheskiy zhurnal — Science and Education: Electronic Scientific and technical Journal, 2016, no. 9, pp. 124–138. DOI: 10.7463/0715.0786138
[17] Bannykh O.A., Drits M.E., eds. Diagrammy sostoyaniya dvoynykh i mnogokomponentnykh sistem na osnove zheleza [Diagrams of state of binary and multicomponent systems based on iron]. Moscow, Metallurgiya Publ., 1986, 440 p.
[18] Pokrovsky A.M. Termoprochnost tselnokovanykh i bandazhirovannykh prokatnykh valkov [Thermal Strength of Solid Forged and Shrouded Mill Rolls]. Moscow, BMSTU Publ., 2017, 272 p.
[19] Gulyayev A.P., Gulyayev A.A. Metallovedenie [Science of Metals]. Moscow, Alyans Publ., 2011, 644 p.
[20] Beketov A.V. Osobennosti protsessov strukturoobrazovaniya i razrabotka parametrov uprochneniya stali 10G2FB. Diss. kand. tekhn. nauk [Features of the processes of structure formation and the development of hardening parameters of steel 10G2FB. Cand. eng. sc. diss.]. Dnepropetrovsk (Ukraine), 2004, 158 p.
[21] Kiefner J.F. Dealing with low-frequency-welded ERW pipe and flash-welded pipe with respect to HCA-related integrity assessments. Proceedings of engineering technology conference on energy. Houston, Texas. February, 2002.
[22] Varshitsky V.M., Valiyev M.I., Kozyrev O.A. Nauka i tekhnologii truboprovodnogo transporta nefti i nefteproduktov – Science and Technologies: Oil and Oil Products Pipeline Transportation, 2013, no. 3, pp. 42–46.
[23] Panasuk V.V., red. Mekhanika razrusheniya i prochnost materialov: Spravochnoye posobiye. V 4 t. T. 2. Koeffitsiyenty intensivnosti napryazheniy dlya tel s treshchinami [Fracture Mechanics and Strength of Materials: A Reference Guide. In 4 vols. Vol. 2. Stress intensity factors for bodies with cracks]. Kiev, Naukova lumka Publ., 1988, 620 p.
[24] Makhutov N.A., Pokrovsky A.M., Dubovitsky E.I. Problemy mashinostroeniya i nadezhosti mashin — Journal of Machinery Manufacture and Reliability, 2019, no. 1, pp. 44–52.