Heat treatment effect on dynamic characteristics of the polylactide beam structures printed on a 3D printer by the FDM method
The paper presents general description of the FDM technology and a brief overview of its application in the aerospace industry. Main advantages and disadvantages of using poly-lactide in the 3D printing are considered. Influence of heat treatment on the dynamic characteristics of beam structures printed with a 3D printer from polylactide were determined. Resonance oscillation tests of the beam samples were carried out at different filling densities and various modes of preliminary thermal processing in the furnace. Comparative analysis of natural frequencies and damping coefficients of the samples depending on the preliminary heating temperature is provided. Experimental study showed that heat treatment of the beam structures made of polylactide leads to an increase in their rigidity and practically is not affecting the damping. Results of the work made it possible to determine the optimal preheating temperature for polylactide.
 Kulikov G.G., Kruzhkov V.N., Dron E.A., Kolesnikov A.A., Kruzhkov O.N., Sharipova A.M. Vvedenie v informatsionnye sistemy tsifrovogo modelirovaniya [Introduction to digital modeling information systems]. Moscow, RIC USATU, 2016, 184 p.
 Dehoff R., Tallman C., Duty C., Peter W., Yamamoto Y., Chen W., Blue C. Case Study: additive manufacturing of aerospace brackets. Advanced Materials and Processes, 2013, vol. 171, pp. 19–23.
 Leonenkov A.D., Dvirny V.V. Perspektivy primeneniya additivnykh tekhnologiy v aerokosmicheskoy otrasli [Prospects for the use of additive technologies in the aerospace industry]. Reshetnevskie chteniya — Reshetnev Readings, 2017, no. 21–2, pp. 632–633.
 3D Printed plastics in functional aerospace parts. PADT Inc. Available at: https://padtinc.com/2015/12/23/3d-printed-plastics-in-functional-aerospace-parts/ (accessed January 20, 2022).
 Tilinin M.V., Pribytkov B.M. Additivnye tekhnologii v otechestvennom aviastroyenii: tekuschie pozitsii i napravleniya razvitiya [Additive technologies in the domestic aircraft industry: current positions and directions of development]. Molodoy ucheny — Young scientist LLC, 2019, no. 47 (285), pp. 133–138. Available at: https://moluch.ru/archive/285/64365/ (accessed January 29, 2022).
 Abramova I.A., Polkov D.A. Tekhnologiya posloynogo naplavleniya [Fused deposition modeling technology]. Nauka i voennaya bezopasnost (Science and military security), 2016, no. 3, pp. 111–114.
 Mohamed O.A., Masood S.H., Bhowmik J.L. Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Advances in Manufacturing, 2015, no. 3, pp. 42–53. https://doi.org/10.1007/s40436-014-0097-7
 Chuvaev I.A., Gabelchenko N.I. Termicheskaya obrabotka 3D pechatnykh izdeliy iz plastmass [Heat treatment of 3D printed plastic products]. Mezhdunarodnyi nauchno-issledovatelskiy zhurnal — International Research Journal, 2019, no. 6, pp. 70–75.
 Krishna Chaitanya S., Madhava Reddy Dr. K., Sai Naga Sri Harsha. Ch. Vibration properties of 3D printed/rapid prototype parts. International Journal of Innovative Research in Science Engineering and Technology, 2015, vol. 4, pp. 4602–4608.
 Kannan S., Ramamoorthy M. Mechanical characterization and experimental modal analysis of 3D printed ABS, PC and PC-ABS materials. Materials Research Express, 2020, vol. 7, pp. 111–123.