Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

The method of modeling of the main hydraulic press cylinder

Published: 13.02.2017

Authors: Antsifirov A.A., Krivoshein V.A., Zimov D.V.

Published in issue: #3(63)/2017

DOI: 10.18698/2308-6033-2017-3-1595

Category: Mechanical Engineering and Machine Science | Chapter: Forming Technologies and Equipment

The article is devoted to the simulation method and research of the main cylinder of four-column hydraulic press of nominal force 5MN when loading cylinder by pressure 25 MPa. On the basis of a solid model of the hydraulic cylinder we provide the results of ANSYS modeling on the strength of the main hydraulic cylinder parts. These results are compared with the analytical ones of calculations. The research of each cylinder detail is accompanied by a graphic illustration. We show benefits of using both analytical and program research means. Our simulation results and analytical calculations differ slightly.


References
[1] Basov K.A. ANSYS dlya konstruktorov [ANSYS for designers]. Moscow, DMK Press, 2009, 238 p.
[2] Tremblei T. Autodesk Inventor 2013 i Inventor LT™ 2013. Osnonvy. Ofitsialnyi uchebnyi kurs [Autodesk Inventor 2013 and Inventor LT™ 2013. Basics. Official training course], Moscow, DMK Press, 2013, 244 p.
[3] Marutov V.A., Pavlovkii S.A. Gidrotsylindry. Konstruktsiya i raschet [Hydraulic cylinders. Design and calculation]. Moscow, Mashinostroenie Publ., 1966, 170 p.
[4] Bocharov Yu.A. Kuznechno-shtampovochnoe oborudovanie [Forging and stamping equipment]. Moscow, Academiya Publ., 2008, 480 p.
[5] Zhivov L.I., Ovchinnikov A.G., Skladchikov E.N. Kuznechno-shtampovochnoe oborudovanie [Forging and stamping equipment]. Moscow, BMSTU Publ., 2006, 560 p.
[6] Korkin N.P. Issledovanie usloviy ekspluatacii i razrabotka sistemy upravleniya prochnostnymi i tehnologicheskimi parametrami gidravlicheskih pressov. Dis. ... cand. tekhn. nauk [Research operating conditions and control system development by strength and technological parameters of hydraulic presses. Cand. of Engineering Sc. Thesis]. Moscow, 2009, 120 p.
[7] Markov D.G. Razrabotka, issledovanie I obosnovanie tehnicheskih resheniy dlya uvelicheniya cily gidravlicheskogo pressa s 200 do 350 MN. Dis. ... cand. tekhn. nauk [Development, research and support of technical solutions to increase the force of a hydraulic press from 200 to 350 MN. Cand. of Engineering Sc. Thesis]. Moscow, 2009, 79 p.
[8] Feodosev V.I. Soprotivlenie materialov [Strength of materials]. 10th ed. Moscow, BMSTU Publ., 1999, 592 p.
[9] Arzamasov B.N., Soloveva T.V., Gerasimov S.A., Mukhin G.G., Zineev V.N. Spracochnik po konstruktsionnym materialam [Reference on construction materials]. Moscow, BMSTU Publ., 2006, 636 p.
[10] Pisarenko G.S., Yakovlev A.P., Matveev V.V. Spravochnik po soprotivleniyu materialov [Handbook on strength of materials]. Kiev, Naukova dumka Publ., 1988, 736 p.