Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

Technological processes of formation of solid-state wire bonds in the controlled gas environment in the manufacture of porous mesh materials with desired properties: practical application of research results

Published: 28.07.2022

Authors: Tretyakov A.F.

Published in issue: #7(127)/2022

DOI: 10.18698/2308-6033-2022-7-2198

Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials

A specific feature of the structure-forming elements used for the manufacture of porous mesh materials is a high specific surface area and a complex configuration of wire meshes, which excludes the possibility of using wire cutting for welding. The research shows that cleaning in Freon-113 is an effective way to remove mineral oils, paraffins, fats and some other contaminants from the mesh surface, since this solvent is stable, non-flammable, non-explosive and does not interact with the workpiece material. In addition, improving the quality of mesh cleaning is achieved by superimposing ultrasonic vibrations in the range of 20...40 kHz. The study introduces flow layouts for the porous materials manufacture by pressure welding of wire meshes from steel 12Kh18N10T and titanium alloy VT2. Findings of the research show that welding envelopes of meshes made of steel I2XI8HI0T by rolling in evacuated makes it possible to obtain porous elements with sufficiently high mechanical and technological properties. It is possible to implement this process on any sheet rolling mill, which is its significant advantage. The paper gives the modes of welding by rolling and diffusion welding of meshes in the manufacture of porous materials. Within the study, we developed a mathematical model that makes it possible to predict the ultimate interlaminar strength for given values of technological parameters of the processes for manufacturing sheet blanks. It is proposed to control the interlayer strength by comparing the calculated data and the results of testing the samples for separation in accordance with the developed methodology. It is advisable to evaluate the control of strength, plasticity in the sheet plane and their anisotropy by comparing the calculated data and the results of testing specimens under conditions of biaxial tension, implemented during hydrostatic buckling through a round matrix.


References
[1] Tretyakov A.F. Problemy chernoy metallurgii i materialovedeniya (Problems of ferrous metallurgy and materials science), 2016, no. 1, pp. 5–10.
[2] Tretyakov A.F. Inzhenerny zhurnal: nauka i innovatsii — Engineering Journal: Science and Innovation, 2022, iss. 2. http://dx.doi.org/10.18698/2308-6033-2022-2-2156
[3] Tretyakov A.F. Inzhenerny zhurnal: nauka i innovatsii — Engineering Journal: Science and Innovation, 2022, iss. 5. http://dx.doi.org/10.18698/2308-6033-2022-5-2181
[4] Tretyakov A.F. Inzhenerny zhurnal: nauka i innovatsii — Engineering Journal: Science and Innovation, 2022, iss. 6. http://dx.doi.org/10.18698/2308-6033-2022-6-2189
[5] Skvortsov K.F. Podgotovka poverkhnostey detaley dlya naneseniya pokrytiy [Surface preparation of parts for coating]. Moscow, Metallurgiya Publ., 1980, 64 p.
[6] Spring S. Ochistka poverkhnostey metallov [Cleaning of metal surfaces]. Moscow, Mir Publ., 1966, 247 p. (In Russ.).
[7] Rozenberg L.D. Fizicheskie osnovy ultrazvukovoy tekhnologii [Physical foundations of ultrasonic technology]. Moscow, Nauka Publ., 1970, 688 p.
[8] Krupnin V.P., Lepetskiy B.A., Zarapin Yu.L., et al. Vakuumnye prokatnye stany [Vacuum rolling mills]. Moscow, Mashinostroenie Publ., 1973, 232 p.
[9] Andronov E.V., Borisov A.Ya., Gertsik M.A., et al. Metallurgiya (Metallurgy), 1969, no. 12, pp. 80–85.
[10] Sinelnikov Yu.I., Tretyakov A.F., Maturin N.I., et al. Poristye setchatye materialy [Porous mesh materials]. Moscow, Metallurgiya Publ., 1983, 64 p.
[11] Belov S.V. Poristye metally v mashinostroenii [Porous metals in mechanical engineering]. Moscow, Mashinostroenie Publ., 1981, 247 p.
[12] Tretyakov A.F. Proizvodstvo prokata (Rolled products production), 2013, no. 5, pp. 32–42.
[13] Belov S.V., ed. Poristye pronitsaemye materialy: spravochnik [Porous permeable materials: reference book]. Moscow, Metallurgiya Publ., 1987, 338 p.
[14] Tretyakov A.F. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie — BMSTU Journal of Mechanical Engineering, 2016, no. 11, pp. 3–13.
[15] Tretyakov A.F. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie — BMSTU Journal of Mechanical Engineering, 2018, no. 2, pp. 42–49.
[16] Tretyakov A.F. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie — BMSTU Journal of Mechanical Engineering, 2016, no. 12, pp. 87–96.
[17] Kurkin S.A. Prochnost svarnykh tonkostennykh sosudov, rabotayuschikh pod davleniem [Strength of welded thin-walled pressure vessels]. Moscow, Mashinostroenie Publ., 1976, 184 p.