Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский

Assessing geometrically nonlinear behavior of the anisotropic structure short surface defects in composite panels under compression

Published: 11.04.2024

Authors: Mitrofanov O.V., Shkurin M.V., Dudchenko A.A.

Published in issue: #4(148)/2024

DOI: 10.18698/2308-6033-2024-4-2353

Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials

Development of technological processes in manufacture of the stamped and welded products using the corrosion-resistant porous materials with the specified properties

Published: 30.03.2024

Authors: Tretyakov A.F., Danilenko K.B.

Published in issue: #3(147)/2024

DOI: 10.18698/2308-6033-2024-3-2346

Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials

A comparative study on the influence of heating modes on the properties of cobalt and nickel nanopowders produced by the chemical-metallurgy method

Published: 29.03.2023

Authors: Tien Hiep Nguyen, Nguyen Van Minh, Nguyen Manh Hung, Nguyen Van Hoang, Nguyen Van Chuong, Do Van Minh, Tang Viet Phuong, Nguyen Viet Anh

Published in issue: #3(135)/2023

DOI: 10.18698/2308-6033-2023-3-2263

Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials

Use of combined porous mesh material in phase separation and filtering devices design for space liquid propellant rocket propulsion systems: current state and problems

Published: 24.03.2023

Authors: Alexandrov L.G., Konstantinov S.B., Platov I.V., Novikov Y.M., Bolshakov V.A., Partola I.S.

Published in issue: #3(135)/2023

DOI: 10.18698/2308-6033-2023-3-2259

Category: Aviation and Rocket-Space Engineering | Chapter: Thermal, Electric Jet Engines, and Power Plants of Aircrafts

On practical methods to determine porometric characteristics of thin samples made from combined porous mesh material

Published: 29.01.2023

Authors: Alexandrov L.G., Konstantinov S.B., Markov A.V., Novikov Y.M., Platov I.V.

Published in issue: #1(133)/2023

DOI: 10.18698/2308-6033-2023-1-2244

Category: Aviation and Rocket-Space Engineering | Chapter: Design, construction and production of aircraft