﻿ Estimation of the residual strength resource of machines | Engineering Journal: Science and Innovation
Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
Article

### Estimation of the residual strength resource of machines

Published: 18.11.2019

Authors: Kishtykov Kh.B.

Published in issue: #11(95)/2019

Category: Mechanics | Chapter: Dynamics, Strength of Machines, Instruments, and Equipment

For objective reasons, machines experience short-term overload, which can lead to damage or destruction of the structure. Under these conditions, it is important to estimate the residual resource of machine fatigue characteristics. For this purpose in engineering practice the method of single overloads (from a high level to low) is widely used. The method allows simulating a mode of adverse irregular loading. Single overload at a level exceeding the initial endurance limit for a certain number of cycles reduces the endurance limit and the residual resource of the structure durability. The empirical dependences proposed in the literature for estimating the relative decrease in endurance limits from the overload coefficient and the cyclic ratio give a complete decrease in the secondary endurance limit at a cyclic ratio equal to one. This is inconsistent with experimental results indicating the existence of a marginal reduction in secondary endurance limits. The formula allowing to correct slightly these dependences and to describe marginal decrease of secondary endurance limits, also under some conditions gives full decrease of secondary endurance limits or loses physical sense. Although the dependence proposed for titanium alloys gives a marginal reduction in the secondary endurance limits other than zero, it determines the anomalous nature of the asymptotic curve which does not correspond to numerous experimental data and mathematical models of damage. Earlier, the author has developed a mathematical model of single overloads and on its basis he has performed an estimation of the residual resource of machine durability based on the results of statistical tests of laboratory samples. In this paper, this model is used to estimate the residual structural strength of machines. The calculated dependences are proposed that satisfactorily describe the experiment and are free from the above shortcomings. These relations can be recommended for implementation in the practice of engineering calculations.

References
[1] Kishtykov Kh. B. Matematicheskaya model odnokratnykh peregruzok i raschetnaya otsenka ostatochnogo resursa dolgovechnosti mashin [Mathematical model of single-stage overloads and calculation of residual lifetime of machines]. Materialy Vserossiyskoy nauchno-tekhnicheskoy konferentsii “Nauka, tekhnika i tekhnologiya novogo veka (NTT-2003) [Proceedings of the All-Russian scientific and technical conference “Science, engineering and technology of new century” (SET-2003)]. Nalchik, Kabardino-Balkarskiy Gosudarstvennyy Universitet Publ., 2003, pp. 215–222.
[2] Henry D.L. Transactions of the ASME, 1955, vol. 77, no. 6, pp. 101–113.
[3] Serensen S.V., red. Spravochnik mashinostroitelya. V 6 tomakh. T. 3. [Handbook of a mechanical engineer. In 6 vols. Vol. 3]. Moscow, Mashgiz Publ., 1962, 651 p.
[4] Goltsev D.I. Priblizhennaya otsenka predela vynoslovosti konstruktsionnykh materialov [An approximate assessment of the endurance limit of structural materials]. In: Voprosy dinamiki i dinamicheskoy prochnosti. Sbornik trudov [Issues of dynamics and dynamic strength. Collection of research papers]. Riga, Academy of Sciences of the Latvian SSR Publ., 1955, pp. 65–73.
[5] Kogaev V.P. Raschety na prochnost pri napryazheniyakh, peremennykh vo vremeni [Strength calculations at time-variable stresses]. Moscow, Mashinostroenie Publ., 1977, 232 p.
[6] Vsevolodov G.N., Kurnaeva N.N., Loshakova N.I. Vliyanie odnokratnoy peregruzki na ustalostnuyu prochnost [Effect of single overload on fatigue strength]. Trudy Leningradskogo korablestroitelnogo instituta. Vypusk 100. Prochnost sudovykh konstruktsiy [Proceedings of the Leningrad Shipbuilding Institute. No. 100. Strength of ship structures]. Leningrad, 1975.
[7] Raltsevich N.V. Vliyanie tsiklicheskikh peregruzik na ustalostnuyu prochnost dvukh marok stali i splava titana [The effect of cyclic overloads on the fatigue strength of two grades of steel and titanium alloy]. Trudy Leningradskogo korablestroitelnogo institute. Vypusk 75 Stroitelnaya mekhanika, svarka, prochnost konstruktsiy i materialov, tekhnologiya [Proceedings of the Leningrad Shipbuilding Institute. No. 75. Structural mechanics, welding, strength of structures and materials, technology]. Leningrad, MVSSO SSSR Publ., 1971, pp. 113–121.
[8] Vagapov R.D. Statisticheskaya konkretizatsiya deterministskoy modeli povrezhdeniya na pervoy stadia ustalosti [Statistical concretization of the deterministic model of damage at the first stage of fatigue]. In: Dinamika i prochnost uprugikh i gidrouprugikh system [Dynamics and strength of elastic and hydroelastic systems]. Moscow, Nauka Publ., 1975, pp. 121–136.
[9] Vagapov R.D., Kishtykov Kh.B., Shadrin V.P. Vtorichnye oblasti rasseivaniya i raspredeleniya predelov ustalosti pri odnokratnoy smene amplitude napryazheniy [Secondary areas of dispersion and distribution of fatigue limits with a single change in stress amplitudes]. In: Dinamika i prochnost uprugikh i gidrouprugikh system [Dynamics and strength of elastic and hydroelastic systems]. Moscow, Nauka Publ., 1975, pp. 136–143.
[10] Kishtykov Kh.B. Vestnik Kabardino-Balkarskogo Gosudarstvennogo Universiteta. Seriya: Tekhnicheskie nauki (Bulletin of Kabardino-Balkarian State University. Series: Engineering Sciences), 1994, no. 1, pp. 67–73.
[11] Kishtykov Kh.B. Kachestvo. Innovatsii. Obrazovanie — Quality. Innovations. Education, 2015, no. 7, pp. 40–46.
[12] Kishtykov Kh.B. Kachestvo i zhizn — Quality and Life, 2017, no. 1, pp. 63–67.
[13] Kishtykov Kh.B. Izvestiya Kabardino-Balkarskogo Gosudarstvennogo Universiteta — News of Kabardino-Balkarian State University, 2013, vol. III, no. 3, pp. 53–59.
[14] Vagapov R.D., Shadrin V.P. Eksperimentalnoe obosnovanie dvukhkompo-nentnoy ststisticheskoy modeli litogo tela [Experimental substantiation of two-component statistical model of cast body]. In: Mekhanika [Mechanics]. Kuybyshev, Kuybyshev Polytechnic Institute Publ., 1974, pp. 76–81.